the default scheme is MLB The Show 19 Stubs

  • Though there are many control schemes for pitching, the default scheme is MLB The Show 19 Stubs easily the best, giving you flexibility while staying relatively simple to perform on a constant basis. Above the plate is a meter. It curves upwards to the right for left handed pitchers to the left for pitchers and up. A strike box overlay shows you where you need to place the ball in order to get strikes.

    Each pitch is assigned a face (or R1 if a pitcher has five pitches). You simply select your pitch, choose the place with the analog stick, and press the button again to start the meter. You have to pay attention to the red portion Since the meter fills. You have to press on the button in the red portion and a third time as it enters the small sliver of yellow on the way back down. The closer you are to the sliver, the closer the pitch be to your location.

    This is not necessarily the case. The red meter determines speed, hence the higher up you wait to press the button, the faster the ball will go. But velocity means the meter will fling making it more challenging to control. In reality, you usually want to halt the meter just before it enters the red to be in a position to The show 19 stubs have optimum control.The reason? When you really begin to dig in the Show, positioning is more important than rate. A 100 mph fastball that misses the corners is an pitch. But a fastball that nips the corner isn't so easy to make contact .